St. Olaf Equipment Tutorials

Guides for the equipment available for checkout at St. Olaf College.

LibKey Nomad

Turning on and Pairing Wireless GO II

Simply press and hold the power button on the receiver.
To pair your transmitter to the receiver, press and hold the power button on the transmitters one at a time. Once turned on, they will automatically pair to the receiver. This should take a few seconds.
- If a transmitter loses connection with the receiver, the blue LED transmitter will flash and the icons for that channel will go blank on the receiver, making it easy to identify which one you need to reconnect.
- If you need to reconnect the receiver, press and hold the pair button on the receiver for three seconds to enable pairing mode, then single-click the power button on the transmitter and wait a few seconds.

Disconnect the Transmitter

Select it by single-clicking the pair button, then press and hold the pair button for three seconds.

Connecting Lavalier Mic System

Connect your Lavalier II to the 3.5mm audio input on your wireless system’s transmitter or recording device
Slot the base of the Lavalier II’s Microphone into the included Mic Clip so that the mic capsule faces the same direction as the RODE logo on the clip
If you’ll be talking outdoors, in slight wind or with the mic closer to your mouth, slide the pop filter over the microphone. For windier environments, use the mini furry instead
Thread the lavalier II cable through your clothing and clip the mic to your collar, hat brim, shirt-front, or anywhere else that’s in close proximity to your mouth

Resources

https://rode.com/en/user-guides/wireless-go-ii