St. Olaf Equipment Tutorials

Turning On

1. Connect the AC adapter to the projector’s power inlet.

2. Plug the power cord into an electrical outlet and connect it to the AC adapter.

3. Press the power button on the projector or the remote to turn on.

   • The status light will flash blue until the projector is warmed up.

Selecting an Image Source

• Make sure the connected image source is turned on (ie laptop).

• For video image sources, insert a DVD or other video media then press play if necessary.

• Press the source search button on the remote then press the up or down buttons to select an image source.

Adjusting Image Height

1. Turn on the projector and display an image.

2. Press and hold the foot release lever to extend or retract the front adjustable foot.

3. Release the lever to lock the foot when the image is in the position you want

Turning Off

1. Press the power button on the projector or the remote then press the power button again.

2. Make sure the status indicator light is off before unplugging the projector.

Projector Connections

• HDMI

  • If your video source has an HDMI port, you can connect it to the projector using an HDMI cable.

  • The video source’s sound is output to the projector’s speakers.

• USB

  • You can connect a USB device or cable to the projector’s USB-A port to project images from the device.

  • If your USB device came with an AC adapter, plug the device into an electrical outlet then connect the USB device or cable to the projector’s USB-A port.

  • If you connected a USB cable, connect the other end to the USB device as necessary.

Keystone Correction

1. Turn on the projector and display an image.

2. Press the keystone button on the projector remote control.

3. Use the arrow buttons on the remote to select between vertical and horizontal keystone correction, and adjust the image shape as necessary.

Sound Modes

• Standard —Outputs audio using normal sound quality.

• Vocal —Best for hearing voices and spoken dialogue.

• Movie —Best for audio from videos or movies.

Changing the Sound Mode

1. Turn on the projector and start a video then press the settings button on the remote control.

2. Press the arrow buttons to select the settings menu and press enter.

3. Select  the Sound>Sound Mode setting and press enter.

4. Select a sound mode and press enter

Resources

User Manual: https://files.support.epson.com/docid/cpd5/cpd59707.pdf