St. Olaf Equipment Tutorials

Setting up the tripod stand:

1. Set the screen and stand down. Undo the velcro handle 
2. Press latch and slide out to remove the stand
3. Loosen the knob and stretch out the legs of the stand fully. Retighten the knob
4. Place the tripod in desired position, preferable on a flat, smooth surface 

Attaching/setting up screen:

1. Take the screen and gently slide it into place on top of the stand
2. Press latches on both sides of the screen and gently pull apart (it may be useful to have another person help). Pull until click for a standard 4:3 position or a bit further for a widescreen 16:9
3. Set projector facing the screen: an 8-10 foot distance is recommended 

Best if not used in a windy setting for the screen is a bit unstable

Dismantling: 

1. Gently push both ends of the screen inwards until the latches click
2. Lift the screen up to remove it from the stand, place it off to the side
3. Loosen knob on stand and push legs inwards. Tighten knob
4. Slide in the stand onto the back of the screen so that it lines up perfectly. Make sure the latch is secure. Close the velcro handles

User Manual:

https://files.support.epson.com/pdf/duet__/duet__bb.pdf