St. Olaf Equipment Tutorials

Images

Getting Started

1. Plug the batteries at the back of the lights. 

2. Attach the mounts as instructed. 

3. Place the diffusion panels in front of the light panels to soften the light output if desired.

4. Hold the power button for a few seconds to turn on/off. 

5. Use the knobs to adjust the lights as desired. 

   1. BRG — Adjusts brightness.

   2. CCT/HUE/SA/Scene — Press the knob lightly to switch between modes.

      1. When in Scene Mode, switch scenes by lightly pressing the ON/OFF button.

Battery

To charge the batteries, insert them into the battery chargers and plug the charger into an outlet. 

Mounting

You mount the lights by screwing the stand under the lights. You may attach the Tilting Mount Show Adapter before attaching the stand if you wish change the tilt of the light.

Mounting  and Setting up

1. Insert the subdued light board (Diffusion plate) from the top of the panel.

2. Attach the tilting mount shoe adapter by the screwing it at the bottom of the light.

3. Screw the mini tripod stand to the mount shoe adapter.

4. Adjust the height using the tripod stand the tile suing the mount shoe adapter as desired. 

5. Light can also be attached to a camera by sliding the mount shoe adapter onto the camera and adjust (as pictured below). 

Turning On

1. Insert the lithium battery into the battery installation slot.

   1. Batteries can be charged using the battery chargers. 

2. Hold the power button for a few seconds until the light turns on. Hold it again to turn the light off. 

Function Instruction & Instruction for Use

• Mode Selection

  • Slightly press the CCT/HUE/SAT button to switch modes. Modes include: CCT, HSI, and Special Light.

  • Color Temperature Mode (CCT) — Adjust the brightness and color temperature by turning the rotary knob.

  • HSI Mode (HUE) — Adjust the brightness, hue, and color purity by rotating the knob.

  • Saturation Mode (SAT) — Adjust the saturation by rotating the knob.

  • Scene Mode

    • In scene mode, you switch by lighting pressing the ON/OFF/SCENE TAB button. Use this to adjust the light as desired.

    • There are 8 kinds of scenes: Cop Car, Candle, TV, Bad Bulb, Party, Disco, Paparazzi, Lightning,

Resources

User Manual: https://gvmled.com/wp-content/uploads/2022/08/GVM-RGB10S-User-Manual.pdf